How do I charge my scooter?

Plug the included EGRET charger into a socket and then connect the charger cable to the scooter. At the EGRET ONE the charging socket is located next to the folding kick-stand on the left side of the scooter. Remove the protective rubber cap beforehand. On the EGRET TEN the socket is on the left side close to the front of the electric scooter.

Charging socket EGRET ONE  Charging socket EGRET TEN

When the charging process starts both LEDs turn red. One LED confirms that the charger is ready for use and the other indicates the charge level. Once the battery is charged, one LED turns green and fan turns off. Remove the charger cable from the scooter and then unplug it from the socket. Remember to put the protective cap back onto the scooter after charging to protect the charging socket from dirt and moisture.

Always make sure there is plenty of ventilation and a dry, fireproof environment for the charger and follow these operating instructions:

 

  •       Do no leave the scooter connected to the active charger for more than 48 hours.
  •       Do not leave the charger connected to a socket for more than 48 hours.
  •       Charge the battery at least once every 90 days and move the scooter.
  •       Never store the scooter for more than 24 hours with an empty battery.This prevents a deep discharge with irreparable consequences from occurring.
  •       Do not use the charger if the charger, mains cable or connector cable have any visible signs of damage.
  •       After being charged, if the scooter remains connected to the charger, it will turn on and off again in short spurts. This is not a defect. It simply indicates that individual battery cells are being slowly charged. Nevertheless, make sure that the scooter is not connected to the charger for more than 48 hours.